SolarVenti SV30 Air dehumidifier

///SolarVenti SV30 Air dehumidifier

SolarVenti SV30 Air dehumidifier


The SV30 solar air collectors are delivered with on/off switch.

The panel filter is maintenance free.


Heating Supplement and Cooling fan kit offered separately


The SV30 solar air collectors are delivered with on/off switch.

The panel filter is maintenance free.

Solar Air Collector for mounting on wall (included) or roof ( acquisition )

Rooms: Covers normally minimum 150m²

Maximum performance: 2000 watt

Fan Performance: 100 – 150 m3/hour

Size: 300 x 102 x 7,5 cm

Managing System: SV Regulator 1

SolarVenti SV30 air collector is for 150 m2 of space and may be mounted horizontal on the roof or wall – or vertical on the wall.  It heats ca. 150 m3 in blown air per hour up to 40K at full solar radiation.

This collector may be delivered with an inline fan for 33% air flow.

Solarventi SV30 comes complete with accessories and kit ready for mounting on a wall. Kit for mounting on the roof must be purchased separately.

There are two roof SV30 versions:

1) One with complete Mounting Kits for Roof Tile / Fibre Cement
2) One with complete Mounting Kits for Steel / Roofing felt

The panel filter is maintenance free.

Further information:

Recommended max area of the house in m2150 m2  ( 179.40 yd2 square yards )
Maximum air flow – m3/h200 m3 ( 261.59 yd3 cubic yards )
Complete replacement of the air in the roomIn less than 2 hours
Utilization of solar radiation (Efficiency)70%
Estimated average energy production kWh/m2 per year *620 kWh
Estimated energy production kWh/SV-unit/year *435 kWh
Rise in temperature compared to outdoor temperatureApprox. 40 degrees K (e.g. from 10o C to 50o C)
Dimension  (panel) in mm: L. x W. x D., excl. package3000 x 1020 x 75 mm (118.11″ x 40.16″ x 2.95″)
Dimension  (panel) in mm: L. x W. x D., incl. package3060x 1060 x 90 mm (120.47″ x 41.73″ x 3.54″)
Dimension (roof mounting kit): L. x W. x D., incl. package1080 x 260 x 220 mm (42.52″ x 10.24″ x 8.66″)
Panel size in m23 m2  ( 3.58  yd2 )
Solar cell – watts / power generation18 watt
Ventilator – watts / power consumption5,1 watt
Weight (panel) – kg, excl. package29  kg. ( 63.93 Lb )
Weight (panel) – kg, incl. package31 kg. ( 68.34 Lb)
Weight (roof mounting kit) – kg, incl. package7 kg. ( 15.43  Lb)
Maintenance free (number of years)Up to 15 years
Product warranty5 years
Framework (Material)Aluminium (seawater resistant)
Air outlet on collector – Dimensions in mm125 mm ( 4.92″ )
Cover plate (transparent)Polycarbonate
Indoor inlet valve in the house125 mm ( 4.92″ )
Humidity stop – to prevent condensation water and back draftsYes
Tube for wall mounting, screws etc.Yes
 (* Values are under Danish weather conditions. – Much higher values ​​in countries closer to the equator.)
Cooling and extraction kit with extra solar cellNo
Cooling and extraction kit without extra solar cellYes
Roof mounting kit, type 1, for tile etc.Yes
Roof mounting kit, type 2 for steel plate roof etc.Yes
Basement mounting kitYes


Visible indoor:


Additional information

Weight31 kg
Dimensions306 × 106 × 9 cm
Mounting Type

Wall, Roof


Switch standard, Regulator satandard


Nature, Black, White