SolarVenti SV30 Air Dehumidifier

$3,049.20$3,699.30

The SV30 solar air collectors are delivered with on/off switch.

The panel filter is maintenance free.

 

Heating Supplement and Cooling fan kit offered separately

The SV30 solar air collectors are delivered with on/off switch.

The panel filter is maintenance free.

Solar Air Collector for mounting on wall (included) or roof ( acquisition )
 

Rooms: Covers normally minimum 150m²

Maximum performance: 2000 watt

Fan Performance: 100 – 150 m3/hour

Size: 300 x 102 x 7,5 cm

Managing System: SV Regulator 1

SolarVenti SV30 air collector is for 150 m2 of space and may be mounted horizontal on the roof or wall - or vertical on the wall.  It heats ca. 150 m3 in blown air per hour up to 40K at full solar radiation.

This collector may be delivered with an inline fan for 33% air flow.

Solarventi SV30 comes complete with accessories and kit ready for mounting on a wall. Kit for mounting on the roof must be purchased separately.

There are two roof SV30 versions:

1) One with complete Mounting Kits for Roof Tile / Fibre Cement
2) One with complete Mounting Kits for Steel / Roofing felt

The panel filter is maintenance free.

Further information:

Recommended max area of the house in m2 150 m2  ( 179.40 yd2 square yards )
Maximum air flow - m3/h 200 m3 ( 261.59 yd3 cubic yards )
Complete replacement of the air in the room In less than 2 hours
Utilization of solar radiation (Efficiency) 70%
Estimated average energy production kWh/m2 per year * 620 kWh
Estimated energy production kWh/SV-unit/year * 435 kWh
Rise in temperature compared to outdoor temperature Approx. 40 degrees K (e.g. from 10o C to 50o C)
Dimension  (panel) in mm: L. x W. x D., excl. package 3000 x 1020 x 75 mm (118.11" x 40.16" x 2.95")
Dimension  (panel) in mm: L. x W. x D., incl. package 3060x 1060 x 90 mm (120.47" x 41.73" x 3.54")
Dimension (roof mounting kit): L. x W. x D., incl. package 1080 x 260 x 220 mm (42.52" x 10.24" x 8.66")
Panel size in m2 3 m2  ( 3.58  yd2 )
Solar cell - watts / power generation 18 watt
Ventilator - watts / power consumption 5,1 watt
Weight (panel) – kg, excl. package 29  kg. ( 63.93 Lb )
Weight (panel) – kg, incl. package 31 kg. ( 68.34 Lb)
Weight (roof mounting kit) - kg, incl. package 7 kg. ( 15.43  Lb)
Maintenance free (number of years) Up to 15 years
Product warranty 5 years
Framework (Material) Aluminium (seawater resistant)
Air outlet on collector – Dimensions in mm 125 mm ( 4.92" )
Cover plate (transparent) Polycarbonate
Indoor inlet valve in the house 125 mm ( 4.92" )
Humidity stop - to prevent condensation water and back drafts Yes
Tube for wall mounting, screws etc. Yes
 (* Values are under Danish weather conditions. - Much higher values ​​in countries closer to the equator.)
Accessories:
Cooling and extraction kit with extra solar cell No
Cooling and extraction kit without extra solar cell Yes
Roof mounting kit, type 1, for tile etc. Yes
Roof mounting kit, type 2 for steel plate roof etc. Yes
Basement mounting kit Yes

 


Visible indoor:

sv-30-2sv-30-3

Additional information

Weight 31 kg
Dimensions 306 × 106 × 9 cm
Mounting Type

Wall, Roof

System

Switch standard, Regulator standard

Colour

Alu, Black, White